BYD has demonstrated its FLASH Charging technology within the UK for the primary time, claiming charging speeds that would help address one in every of the most important barriers to EV adoption.
The Chinese manufacturer staged a live demonstration of the system at its UK headquarters in Uxbridge, where it said drivers could add greater than 220 miles of range in five minutes.
BYD said FLASH Charging is able to delivering as much as 1,500kW through a single connector, significantly exceeding the charging speeds currently available through public charging networks within the UK.
Ensure you mostly receive AM insights. Make us a preferred source of stories on Google
The technology is built around what BYD describes as its “Ready in 5, Full in 9, Cold Add 3” principle.
In accordance with the corporate, battery charge could be increased from 5% to 70% in five minutes, while a charge from 10% to 97% takes nine minutes. In temperatures as little as -30°C, a charge from 20% to 97% could be accomplished in 12 minutes.
Denza Z9 GT expected to be first model ready for FLASH Charging
The demonstration vehicle was the DENZA Z9 GT, which is anticipated to grow to be the primary model offered within the UK able to accepting FLASH Charging.
Based on the model’s WLTP range of 372 miles, BYD said a five-minute charge can add 223 miles of driving range, while a nine-minute charge can add 323 miles.
Alongside the charging speed claims, BYD sought to handle concerns concerning the infrastructure required to support ultra-rapid charging.
The corporate said the chargers use on-site battery storage to deliver high charging power, with energy replenished from the grid at lower rates starting from 100kW to 560kW depending on demand.
BYD believes this approach will simplify deployment compared with relying solely on high-capacity grid connections.
BYD plans 300 FLASH chargers across UK before end of 2026
The manufacturer said it plans to put in 300 FLASH chargers by the tip of 2026 at Denza retail locations and other sites.
The charging units feature a twin-cable design mounted on a vertical rail system, which BYD said makes them easier to make use of no matter charge port location and reduces the likelihood of cables becoming damaged or contaminated.
BYD UK country manager Bono Ge shared a fast video of the brand new charging technology in motion on LinkedIn.
This Article First Appeared At www.am-online.com
